Download Hlguard_mm_i686.dll for Windows 10, 8.1, 8, 7, Vista and XP

Hlguard_mm_i686.dll download. The Hlguard_mm_i686.dll file is a dynamic link library for Windows 10, 8.1, 8, 7, Vista and XP. You can fix "The file Hlguard_mm_i686.dll is missing." and "Hlguard_mm_i686.dll not found." errors by downloading and installing this file from our site.

About Hlguard_mm_i686.dll

The Hlguard_mm_i686.dll library is 0.06 MB. The download links have been checked and there are no problems. You can download it without a problem. Currently, it has been downloaded 636 times.

Operating Systems Compatible with the Hlguard_mm_i686.dll Library

Other Versions of the Hlguard_mm_i686.dll Library

The latest version of the Hlguard_mm_i686.dll library is 1.5.0.0 version. This dynamic link library only has one version. There is no other version that can be downloaded.

  1. 1.5.0.0 - 32 Bit (x86) Download directly this version now

Guide to Download Hlguard_mm_i686.dll

  1. First, click on the green-colored "Download" button in the top left section of this page (The button that is marked in the picture).
    Start downloading the Hlguard_mm_i686.dll library
    Step 1:Start downloading the Hlguard_mm_i686.dll library
  2. When you click the "Download" button, the "Downloading" window will open. Don't close this window until the download process begins. The download process will begin in a few seconds based on your Internet speed and computer.

Methods for Fixing Hlguard_mm_i686.dll

ATTENTION! In order to install the Hlguard_mm_i686.dll library, you must first download it. If you haven't downloaded it, before continuing on with the installation, download the library. If you don't know how to download it, all you need to do is look at the dll download guide found on the top line.

Method 1: Copying the Hlguard_mm_i686.dll Library to the Windows System Directory

  1. The file you downloaded is a compressed file with the extension ".zip". This file cannot be installed. To be able to install it, first you need to extract the dynamic link library from within it. So, first double-click the file with the ".zip" extension and open the file.
  2. You will see the library named "Hlguard_mm_i686.dll" in the window that opens. This is the library you need to install. Click on the dynamic link library with the left button of the mouse. By doing this, you select the library.
    Choosing the Hlguard_mm_i686.dll library
    Step 2:Choosing the Hlguard_mm_i686.dll library
  3. Click on the "Extract To" button, which is marked in the picture. In order to do this, you will need the Winrar program. If you don't have the program, it can be found doing a quick search on the Internet and you can download it (The Winrar program is free).
  4. After clicking the "Extract to" button, a window where you can choose the location you want will open. Choose the "Desktop" location in this window and extract the dynamic link library to the desktop by clicking the "Ok" button.
    Extracting the Hlguard_mm_i686.dll library to the desktop
    Step 3:Extracting the Hlguard_mm_i686.dll library to the desktop
  5. Copy the "Hlguard_mm_i686.dll" library and paste it into the "C:\Windows\System32" directory.
    Copying the Hlguard_mm_i686.dll library into the Windows/System32 directory
    Step 3:Copying the Hlguard_mm_i686.dll library into the Windows/System32 directory
  6. If you are using a 64 Bit operating system, copy the "Hlguard_mm_i686.dll" library and paste it into the "C:\Windows\sysWOW64" as well.
    NOTE! On Windows operating systems with 64 Bit architecture, the dynamic link library must be in both the "sysWOW64" directory as well as the "System32" directory. In other words, you must copy the "Hlguard_mm_i686.dll" library into both directories.
    Pasting the Hlguard_mm_i686.dll library into the Windows/sysWOW64 directory
    Step 4:Pasting the Hlguard_mm_i686.dll library into the Windows/sysWOW64 directory
  7. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
    NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
    1. Open the Start Menu and before clicking anywhere, type "cmd" on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in "cmd" to bring up the Command Prompt.
    2. Right-click the "Command Prompt" search result that comes up and click the Run as administrator" option.
    Running the Command Prompt as administrator
    Step 5:Running the Command Prompt as administrator
  8. Let's copy the command below and paste it in the Command Line that comes up, then let's press Enter. This command deletes the Hlguard_mm_i686.dll library's problematic registry in the Windows Registry Editor (The library that we copied to the System32 directory does not perform any action with the library, it just deletes the registry in the Windows Registry Editor. The library that we pasted into the System32 directory will not be damaged).
    %windir%\System32\regsvr32.exe /u Hlguard_mm_i686.dll
    Deleting the Hlguard_mm_i686.dll library's problematic registry in the Windows Registry Editor
    Step 6:Deleting the Hlguard_mm_i686.dll library's problematic registry in the Windows Registry Editor
  9. If you are using a Windows version that has 64 Bit architecture, after running the above command, you need to run the command below. With this command, we will clean the problematic Hlguard_mm_i686.dll registry for 64 Bit (The cleaning process only involves the registries in Regedit. In other words, the dynamic link library you pasted into the SysWoW64 will not be damaged).
    %windir%\SysWoW64\regsvr32.exe /u Hlguard_mm_i686.dll
    Uninstalling the Hlguard_mm_i686.dll library's problematic registry from Regedit (for 64 Bit)
    Step 7:Uninstalling the Hlguard_mm_i686.dll library's problematic registry from Regedit (for 64 Bit)
  10. We need to make a new registry for the dynamic link library in place of the one we deleted from the Windows Registry Editor. In order to do this process, copy the command below and after pasting it in the Command Line, press Enter.
    %windir%\System32\regsvr32.exe /i Hlguard_mm_i686.dll
    Creating a new registry for the Hlguard_mm_i686.dll library in the Windows Registry Editor
    Step 8:Creating a new registry for the Hlguard_mm_i686.dll library in the Windows Registry Editor
  11. Windows 64 Bit users must run the command below after running the previous command. With this command, we will create a clean and good registry for the Hlguard_mm_i686.dll library we deleted.
    %windir%\SysWoW64\regsvr32.exe /i Hlguard_mm_i686.dll
    Creating a clean and good registry for the Hlguard_mm_i686.dll library (64 Bit için)
    Step 9:Creating a clean and good registry for the Hlguard_mm_i686.dll library (64 Bit için)
  12. If you did the processes in full, the installation should have finished successfully. If you received an error from the command line, you don't need to be anxious. Even if the Hlguard_mm_i686.dll library was installed successfully, you can still receive error messages like these due to some incompatibilities. In order to test whether your dll issue was fixed or not, try running the program giving the error message again. If the error is continuing, try the 2nd Method to fix this issue.

Method 2: Copying The Hlguard_mm_i686.dll Library Into The Program Installation Directory

  1. In order to install the dynamic link library, you need to find the installation directory for the program that was giving you errors such as "Hlguard_mm_i686.dll is missing", "Hlguard_mm_i686.dll not found" or similar error messages. In order to do that, Right-click the program's shortcut and click the Properties item in the right-click menu that appears.
    Opening the program shortcut properties window
    Step 1:Opening the program shortcut properties window
  2. Click on the Open File Location button that is found in the Properties window that opens up and choose the folder where the application is installed.
    Opening the installation directory of the program
    Step 2:Opening the installation directory of the program
  3. Copy the Hlguard_mm_i686.dll library into this directory that opens.
    Copying the Hlguard_mm_i686.dll library into the program's installation directory
    Step 3:Copying the Hlguard_mm_i686.dll library into the program's installation directory
  4. This is all there is to the process. Now, try to run the program again. If the problem still is not solved, you can try the 3rd Method.

Method 3: Uninstalling and Reinstalling the Program that Gives You the Hlguard_mm_i686.dll Error

  1. Open the Run tool by pushing the "Windows" + "R" keys found on your keyboard. Type the command below into the "Open" field of the Run window that opens up and press Enter. This command will open the "Programs and Features" tool.
    appwiz.cpl
    Opening the Programs and Features tool with the appwiz.cpl command
    Step 1:Opening the Programs and Features tool with the appwiz.cpl command
  2. The Programs and Features screen will come up. You can see all the programs installed on your computer in the list on this screen. Find the program giving you the dll error in the list and right-click it. Click the "Uninstall" item in the right-click menu that appears and begin the uninstall process.
    Starting the uninstall process for the program that is giving the error
    Step 2:Starting the uninstall process for the program that is giving the error
  3. A window will open up asking whether to confirm or deny the uninstall process for the program. Confirm the process and wait for the uninstall process to finish. Restart your computer after the program has been uninstalled from your computer.
    Confirming the removal of the program
    Step 3:Confirming the removal of the program
  4. After restarting your computer, reinstall the program that was giving the error.
  5. This method may provide the solution to the dll error you're experiencing. If the dll error is continuing, the problem is most likely deriving from the Windows operating system. In order to fix dll errors deriving from the Windows operating system, complete the 4th Method and the 5th Method.

Method 4: Fixing the Hlguard_mm_i686.dll Issue by Using the Windows System File Checker (scf scannow)

  1. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
    NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
    1. Open the Start Menu and before clicking anywhere, type "cmd" on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in "cmd" to bring up the Command Prompt.
    2. Right-click the "Command Prompt" search result that comes up and click the Run as administrator" option.
    Running the Command Prompt as administrator
    Step 1:Running the Command Prompt as administrator
  2. Type the command below into the Command Line page that comes up and run it by pressing Enter on your keyboard.
    sfc /scannow
    Getting rid of Windows Dll errors by running the sfc /scannow command
    Step 2:Getting rid of Windows Dll errors by running the sfc /scannow command
  3. The process can take some time depending on your computer and the condition of the errors in the system. Before the process is finished, don't close the command line! When the process is finished, try restarting the program that you are experiencing the errors in after closing the command line.

Method 5: Fixing the Hlguard_mm_i686.dll Error by Manually Updating Windows

Some programs require updated dynamic link libraries from the operating system. If your operating system is not updated, this requirement is not met and you will receive dll errors. Because of this, updating your operating system may solve the dll errors you are experiencing.

Most of the time, operating systems are automatically updated. However, in some situations, the automatic updates may not work. For situations like this, you may need to check for updates manually.

For every Windows version, the process of manually checking for updates is different. Because of this, we prepared a special guide for each Windows version. You can get our guides to manually check for updates based on the Windows version you use through the links below.

Windows Update Guides

  1. Windows Update Guide
  2. Windows 8.1 and Windows 8 Update Guide
  3. Windows 7 and Windows Vista Update Guide
  4. Windows XP Update Guide

The Most Seen Hlguard_mm_i686.dll Errors

When the Hlguard_mm_i686.dll library is damaged or missing, the programs that use this dynamic link library will give an error. Not only external programs, but also basic Windows programs and tools use dynamic link libraries. Because of this, when you try to use basic Windows programs and tools (For example, when you open Internet Explorer or Windows Media Player), you may come across errors. We have listed the most common Hlguard_mm_i686.dll errors below.

You will get rid of the errors listed below when you download the Hlguard_mm_i686.dll library from DLL Downloader.com and follow the steps we explained above.

  1. "Hlguard_mm_i686.dll not found." error
  2. "The file Hlguard_mm_i686.dll is missing." error
  3. "Hlguard_mm_i686.dll access violation." error
  4. "Cannot register Hlguard_mm_i686.dll." error
  5. "Cannot find Hlguard_mm_i686.dll." error
  6. "This application failed to start because Hlguard_mm_i686.dll was not found. Re-installing the application may fix this problem." error