Download Instapi.dll for Windows 10, 8.1, 8, 7, Vista and XP

Instapi.dll download. The Instapi.dll file is a dynamic link library for Windows 10, 8.1, 8, 7, Vista and XP. You can fix "The file Instapi.dll is missing." and "Instapi.dll not found." errors by downloading and installing this file from our site.
Download Price:
Free
Dll Description:
INSTALL/UINSTALL UTILITY
Versions:
Size:
0.03 MB
Operating Systems:
Developers:
Directory:
I
Downloads:
1512 times.

About Instapi.dll

The Instapi.dll library was developed by Conexant Systems Inc..

The size of this dynamic link library is 0.03 MB and its download links are healthy. It has been downloaded 1512 times already.

Operating Systems That Can Use the Instapi.dll Library

Other Versions of the Instapi.dll Library

The latest version of the Instapi.dll library is 2005.90.1399.0 version. Before this, there were 2 versions released. All versions released up till now are listed below from newest to oldest

  1. 2005.90.1399.0 - 32 Bit (x86) Download directly this version now
  2. 1.0.0.0 - 32 Bit (x86) (2004-01-31) Download directly this version now
  3. 1.0.0.0 - 32 Bit (x86) Download directly this version now

How to Download Instapi.dll Library?

  1. First, click on the green-colored "Download" button in the top left section of this page (The button that is marked in the picture).
    Start downloading the Instapi.dll library
    Step 1:Start downloading the Instapi.dll library
  2. When you click the "Download" button, the "Downloading" window will open. Don't close this window until the download process begins. The download process will begin in a few seconds based on your Internet speed and computer.

Methods to Fix the Instapi.dll Errors

ATTENTION! Before continuing on to install the Instapi.dll library, you need to download the library. If you have not downloaded it yet, download it before continuing on to the installation steps. If you are having a problem while downloading the library, you can browse the download guide a few lines above.

Method 1: Copying the Instapi.dll Library to the Windows System Directory

  1. The file you are going to download is a compressed file with the ".zip" extension. You cannot directly install the ".zip" file. First, you need to extract the dynamic link library from inside it. So, double-click the file with the ".zip" extension that you downloaded and open the file.
  2. You will see the library named "Instapi.dll" in the window that opens up. This is the library we are going to install. Click the library once with the left mouse button. By doing this you will have chosen the library.
    Choosing the Instapi.dll library
    Step 2:Choosing the Instapi.dll library
  3. Click the "Extract To" symbol marked in the picture. To extract the dynamic link library, it will want you to choose the desired location. Choose the "Desktop" location and click "OK" to extract the library to the desktop. In order to do this, you need to use the Winrar program. If you do not have this program, you can find and download it through a quick search on the Internet.
    Extracting the Instapi.dll library to the desktop
    Step 3:Extracting the Instapi.dll library to the desktop
  4. Copy the "Instapi.dll" library file you extracted.
  5. Paste the dynamic link library you copied into the "C:\Windows\System32" directory.
    Pasting the Instapi.dll library into the Windows/System32 directory
    Step 5:Pasting the Instapi.dll library into the Windows/System32 directory
  6. If your operating system has a 64 Bit architecture, copy the "Instapi.dll" library and paste it also into the "C:\Windows\sysWOW64" directory.
    NOTE! On 64 Bit systems, the dynamic link library must be in both the "sysWOW64" directory as well as the "System32" directory. In other words, you must copy the "Instapi.dll" library into both directories.
    Pasting the Instapi.dll library into the Windows/sysWOW64 directory
    Step 6:Pasting the Instapi.dll library into the Windows/sysWOW64 directory
  7. In order to run the Command Line as an administrator, complete the following steps.
    NOTE! In this explanation, we ran the Command Line on Windows 10. If you are using one of the Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP operating systems, you can use the same methods to run the Command Line as an administrator. Even though the pictures are taken from Windows 10, the processes are similar.
    1. First, open the Start Menu and before clicking anywhere, type "cmd" but do not press Enter.
    2. When you see the "Command Line" option among the search results, hit the "CTRL" + "SHIFT" + "ENTER" keys on your keyboard.
    3. A window will pop up asking, "Do you want to run this process?". Confirm it by clicking to "Yes" button.
    Running the Command Line as an administrator
    Step 7:Running the Command Line as an administrator
  8. Paste the command below into the Command Line that will open up and hit Enter. This command will delete the damaged registry of the Instapi.dll library (It will not delete the file we pasted into the System32 directory; it will delete the registry in Regedit. The file we pasted into the System32 directory will not be damaged).
    %windir%\System32\regsvr32.exe /u Instapi.dll
    Deleting the damaged registry of the Instapi.dll
    Step 8:Deleting the damaged registry of the Instapi.dll
  9. If you have a 64 Bit operating system, after running the command above, you must run the command below. This command will clean the Instapi.dll library's damaged registry in 64 Bit as well (The cleaning process will be in the registries in the Registry Editor< only. In other words, the dll file you paste into the SysWoW64 folder will stay as it).
    %windir%\SysWoW64\regsvr32.exe /u Instapi.dll
    Uninstalling the Instapi.dll library's broken registry from the Registry Editor (for 64 Bit)
    Step 9:Uninstalling the Instapi.dll library's broken registry from the Registry Editor (for 64 Bit)
  10. We need to make a clean registry for the dll library's registry that we deleted from Regedit (Windows Registry Editor). In order to accomplish this, copy and paste the command below into the Command Line and press Enter key.
    %windir%\System32\regsvr32.exe /i Instapi.dll
    Making a clean registry for the Instapi.dll library in Regedit (Windows Registry Editor)
    Step 10:Making a clean registry for the Instapi.dll library in Regedit (Windows Registry Editor)
  11. If you are using a Windows with 64 Bit architecture, after running the previous command, you need to run the command below. By running this command, we will have created a clean registry for the Instapi.dll library (We deleted the damaged registry with the previous command).
    %windir%\SysWoW64\regsvr32.exe /i Instapi.dll
    Creating a clean registry for the Instapi.dll library (for 64 Bit)
    Step 11:Creating a clean registry for the Instapi.dll library (for 64 Bit)
  12. You may see certain error messages when running the commands from the command line. These errors will not prevent the installation of the Instapi.dll library. In other words, the installation will finish, but it may give some errors because of certain incompatibilities. After restarting your computer, to see if the installation was successful or not, try running the program that was giving the dll error again. If you continue to get the errors when running the program after the installation, you can try the 2nd Method as an alternative.

Method 2: Copying The Instapi.dll Library Into The Program Installation Directory

  1. In order to install the dynamic link library, you need to find the installation directory for the program that was giving you errors such as "Instapi.dll is missing", "Instapi.dll not found" or similar error messages. In order to do that, Right-click the program's shortcut and click the Properties item in the right-click menu that appears.
    Opening the program shortcut properties window
    Step 1:Opening the program shortcut properties window
  2. Click on the Open File Location button that is found in the Properties window that opens up and choose the folder where the application is installed.
    Opening the installation directory of the program
    Step 2:Opening the installation directory of the program
  3. Copy the Instapi.dll library into the directory we opened.
    Copying the Instapi.dll library into the installation directory of the program.
    Step 3:Copying the Instapi.dll library into the installation directory of the program.
  4. The installation is complete. Run the program that is giving you the error. If the error is continuing, you may benefit from trying the 3rd Method as an alternative.

Method 3: Doing a Clean Install of the program That Is Giving the Instapi.dll Error

  1. Open the Run window by pressing the "Windows" + "R" keys on your keyboard at the same time. Type in the command below into the Run window and push Enter to run it. This command will open the "Programs and Features" window.
    appwiz.cpl
    Opening the Programs and Features window using the appwiz.cpl command
    Step 1:Opening the Programs and Features window using the appwiz.cpl command
  2. The Programs and Features window will open up. Find the program that is giving you the dll error in this window that lists all the programs on your computer and "Right-Click > Uninstall" on this program.
    Uninstalling the program that is giving you the error message from your computer.
    Step 2:Uninstalling the program that is giving you the error message from your computer.
  3. Uninstall the program from your computer by following the steps that come up and restart your computer.
    Following the confirmation and steps of the program uninstall process
    Step 3:Following the confirmation and steps of the program uninstall process
  4. After restarting your computer, reinstall the program that was giving the error.
  5. You may be able to fix the dll error you are experiencing by using this method. If the error messages are continuing despite all these processes, we may have a issue deriving from Windows. To fix dll errors deriving from Windows, you need to complete the 4th Method and the 5th Method in the list.

Method 4: Fixing the Instapi.dll Issue by Using the Windows System File Checker (scf scannow)

  1. In order to run the Command Line as an administrator, complete the following steps.
    NOTE! In this explanation, we ran the Command Line on Windows 10. If you are using one of the Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP operating systems, you can use the same methods to run the Command Line as an administrator. Even though the pictures are taken from Windows 10, the processes are similar.
    1. First, open the Start Menu and before clicking anywhere, type "cmd" but do not press Enter.
    2. When you see the "Command Line" option among the search results, hit the "CTRL" + "SHIFT" + "ENTER" keys on your keyboard.
    3. A window will pop up asking, "Do you want to run this process?". Confirm it by clicking to "Yes" button.
    Running the Command Line as an administrator
    Step 1:Running the Command Line as an administrator
  2. After typing the command below into the Command Line, push Enter.
    sfc /scannow
    Getting rid of dll errors using Windows's sfc /scannow command
    Step 2:Getting rid of dll errors using Windows's sfc /scannow command
  3. Depending on your computer's performance and the amount of errors on your system, this process can take some time. You can see the progress on the Command Line. Wait for this process to end. After the scan and repair processes are finished, try running the program giving you errors again.

Method 5: Getting Rid of Instapi.dll Errors by Updating the Windows Operating System

Most of the time, programs have been programmed to use the most recent dynamic link libraries. If your operating system is not updated, these files cannot be provided and dll errors appear. So, we will try to fix the dll errors by updating the operating system.

Since the methods to update Windows versions are different from each other, we found it appropriate to prepare a separate article for each Windows version. You can get our update article that relates to your operating system version by using the links below.

Guides to Manually Update the Windows Operating System

  1. Guide to Manually Update Windows 10
  2. Guide to Manually Update Windows 8.1 and Windows 8
  3. Guide to Manually Update Windows 7 and Windows Vista
  4. Guide to Manually Update Windows XP

Most Seen Instapi.dll Errors

It's possible that during the programs' installation or while using them, the Instapi.dll library was damaged or deleted. You can generally see error messages listed below or similar ones in situations like this.

These errors we see are not unsolvable. If you've also received an error message like this, first you must download the Instapi.dll library by clicking the "Download" button in this page's top section. After downloading the library, you should install the library and complete the solution methods explained a little bit above on this page and mount it in Windows. If you do not have a hardware issue, one of the methods explained in this article will fix your issue.

  1. "Instapi.dll not found." error
  2. "The file Instapi.dll is missing." error
  3. "Instapi.dll access violation." error
  4. "Cannot register Instapi.dll." error
  5. "Cannot find Instapi.dll." error
  6. "This application failed to start because Instapi.dll was not found. Re-installing the application may fix this problem." error