Download Autocountercontrol.dll for Windows 10, 8.1, 8, 7, Vista and XP

Autocountercontrol.dll download. The Autocountercontrol.dll file is a dynamic link library for Windows 10, 8.1, 8, 7, Vista and XP. You can fix "The file Autocountercontrol.dll is missing." and "Autocountercontrol.dll not found." errors by downloading and installing this file from our site.

Autocountercontrol.dll Explanation

The Autocountercontrol.dll file is 0.01 MB. The download links for this file are clean and no user has given any negative feedback. From the time it was offered for download, it has been downloaded 543 times.

Operating Systems That Can Use the Autocountercontrol.dll File

All Versions of the Autocountercontrol.dll File

The last version of the Autocountercontrol.dll file is the 0.0.0.0 version. Outside of this version, there is no other version released

  1. 0.0.0.0 - 32 Bit (x86) Download directly this version

Steps to Download the Autocountercontrol.dll File

  1. Click on the green-colored "Download" button (The button marked in the picture below).
    Starting the download process for Autocountercontrol.dll
    Step 1:Starting the download process for Autocountercontrol.dll
  2. After clicking the "Download" button at the top of the page, the "Downloading" page will open up and the download process will begin. Definitely do not close this page until the download begins. Our site will connect you to the closest DLL Downloader.com download server in order to offer you the fastest downloading performance. Connecting you to the server can take a few seconds.

How to Fix Autocountercontrol.dll Errors?

ATTENTION! Before starting the installation, the Autocountercontrol.dll file needs to be downloaded. If you have not downloaded it, download the file before continuing with the installation steps. If you don't know how to download it, you can immediately browse the dll download guide above.

Method 1: Copying the Autocountercontrol.dll File to the Windows System Folder

  1. The file you are going to download is a compressed file with the ".zip" extension. You cannot directly install the ".zip" file. First, you need to extract the dll file from inside it. So, double-click the file with the ".zip" extension that you downloaded and open the file.
  2. You will see the file named "Autocountercontrol.dll" in the window that opens up. This is the file we are going to install. Click the file once with the left mouse button. By doing this you will have chosen the file.
    Choosing the Autocountercontrol.dll file
    Step 2:Choosing the Autocountercontrol.dll file
  3. Click the "Extract To" symbol marked in the picture. To extract the dll file, it will want you to choose the desired location. Choose the "Desktop" location and click "OK" to extract the file to the desktop. In order to do this, you need to use the Winrar software. If you do not have this software, you can find and download it through a quick search on the Internet.
    Extracting the Autocountercontrol.dll file to the desktop
    Step 3:Extracting the Autocountercontrol.dll file to the desktop
  4. Copy the "Autocountercontrol.dll" file file you extracted.
  5. Paste the dll file you copied into the "C:\Windows\System32" folder.
    Pasting the Autocountercontrol.dll file into the Windows/System32 folder
    Step 5:Pasting the Autocountercontrol.dll file into the Windows/System32 folder
  6. If your operating system has a 64 Bit architecture, copy the "Autocountercontrol.dll" file and paste it also into the "C:\Windows\sysWOW64" folder.
    NOTE! On 64 Bit systems, the dll file must be in both the "sysWOW64" folder as well as the "System32" folder. In other words, you must copy the "Autocountercontrol.dll" file into both folders.
    Pasting the Autocountercontrol.dll file into the Windows/sysWOW64 folder
    Step 6:Pasting the Autocountercontrol.dll file into the Windows/sysWOW64 folder
  7. In order to run the Command Line as an administrator, complete the following steps.
    NOTE! In this explanation, we ran the Command Line on Windows 10. If you are using one of the Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP operating systems, you can use the same methods to run the Command Line as an administrator. Even though the pictures are taken from Windows 10, the processes are similar.
    1. First, open the Start Menu and before clicking anywhere, type "cmd" but do not press Enter.
    2. When you see the "Command Line" option among the search results, hit the "CTRL" + "SHIFT" + "ENTER" keys on your keyboard.
    3. A window will pop up asking, "Do you want to run this process?". Confirm it by clicking to "Yes" button.
    Running the Command Line as an administrator
    Step 7:Running the Command Line as an administrator
  8. Paste the command below into the Command Line window that opens up and press Enter key. This command will delete the problematic registry of the Autocountercontrol.dll file (Nothing will happen to the file we pasted in the System32 folder, it just deletes the registry from the Windows Registry Editor. The file we pasted in the System32 folder will not be damaged).
    %windir%\System32\regsvr32.exe /u Autocountercontrol.dll
    Cleaning the problematic registry of the Autocountercontrol.dll file from the Windows Registry Editor
    Step 8:Cleaning the problematic registry of the Autocountercontrol.dll file from the Windows Registry Editor
  9. If the Windows you use has 64 Bit architecture, after running the command above, you must run the command below. This command will clean the broken registry of the Autocountercontrol.dll file from the 64 Bit architecture (The Cleaning process is only with registries in the Windows Registry Editor. In other words, the dll file that we pasted into the SysWoW64 folder will stay as it is).
    %windir%\SysWoW64\regsvr32.exe /u Autocountercontrol.dll
    Uninstalling the broken registry of the Autocountercontrol.dll file from the Windows Registry Editor (for 64 Bit)
    Step 9:Uninstalling the broken registry of the Autocountercontrol.dll file from the Windows Registry Editor (for 64 Bit)
  10. In order to cleanly recreate the dll file's registry that we deleted, copy the command below and paste it into the Command Line and hit Enter.
    %windir%\System32\regsvr32.exe /i Autocountercontrol.dll
    Reregistering the Autocountercontrol.dll file in the system
    Step 10:Reregistering the Autocountercontrol.dll file in the system
  11. If the Windows version you use has 64 Bit architecture, after running the command above, you must run the command below. With this command, you will create a clean registry for the problematic registry of the Autocountercontrol.dll file that we deleted.
    %windir%\SysWoW64\regsvr32.exe /i Autocountercontrol.dll
    Creating a clean registry for the Autocountercontrol.dll file (for 64 Bit)
    Step 11:Creating a clean registry for the Autocountercontrol.dll file (for 64 Bit)
  12. You may see certain error messages when running the commands from the command line. These errors will not prevent the installation of the Autocountercontrol.dll file. In other words, the installation will finish, but it may give some errors because of certain incompatibilities. After restarting your computer, to see if the installation was successful or not, try running the software that was giving the dll error again. If you continue to get the errors when running the software after the installation, you can try the 2nd Method as an alternative.

Method 2: Copying the Autocountercontrol.dll File to the Software File Folder

  1. In order to install the dll file, you need to find the file folder for the software that was giving you errors such as "Autocountercontrol.dll is missing", "Autocountercontrol.dll not found" or similar error messages. In order to do that, Right-click the software's shortcut and click the Properties item in the right-click menu that appears.
    Opening the software shortcut properties window
    Step 1:Opening the software shortcut properties window
  2. Click on the Open File Location button that is found in the Properties window that opens up and choose the folder where the application is installed.
    Opening the file folder of the software
    Step 2:Opening the file folder of the software
  3. Copy the Autocountercontrol.dll file.
  4. Paste the dll file you copied into the software's file folder that we just opened.
    Pasting the Autocountercontrol.dll file into the software's file folder
    Step 3:Pasting the Autocountercontrol.dll file into the software's file folder
  5. When the dll file is moved to the software file folder, it means that the process is completed. Check to see if the problem was solved by running the software giving the error message again. If you are still receiving the error message, you can complete the 3rd Method as an alternative.

Method 3: Uninstalling and Reinstalling the Software That Is Giving the Autocountercontrol.dll Error

  1. Push the "Windows" + "R" keys at the same time to open the Run window. Type the command below into the Run window that opens up and hit Enter. This process will open the "Programs and Features" window.
    appwiz.cpl
    Opening the Programs and Features window using the appwiz.cpl command
    Step 1:Opening the Programs and Features window using the appwiz.cpl command
  2. On the Programs and Features screen that will come up, you will see the list of softwares on your computer. Find the software that gives you the dll error and with your mouse right-click it. The right-click menu will open. Click the "Uninstall" option in this menu to start the uninstall process.
    Uninstalling the software that gives you the dll error
    Step 2:Uninstalling the software that gives you the dll error
  3. You will see a "Do you want to uninstall this software?" confirmation window. Confirm the process and wait for the software to be completely uninstalled. The uninstall process can take some time. This time will change according to your computer's performance and the size of the software. After the software is uninstalled, restart your computer.
    Confirming the uninstall process
    Step 3:Confirming the uninstall process
  4. After restarting your computer, reinstall the software.
  5. This method may provide the solution to the dll error you're experiencing. If the dll error is continuing, the problem is most likely deriving from the Windows operating system. In order to fix dll errors deriving from the Windows operating system, complete the 4th Method and the 5th Method.

Method 4: Solving the Autocountercontrol.dll Error using the Windows System File Checker (sfc /scannow)

  1. In order to run the Command Line as an administrator, complete the following steps.
    NOTE! In this explanation, we ran the Command Line on Windows 10. If you are using one of the Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP operating systems, you can use the same methods to run the Command Line as an administrator. Even though the pictures are taken from Windows 10, the processes are similar.
    1. First, open the Start Menu and before clicking anywhere, type "cmd" but do not press Enter.
    2. When you see the "Command Line" option among the search results, hit the "CTRL" + "SHIFT" + "ENTER" keys on your keyboard.
    3. A window will pop up asking, "Do you want to run this process?". Confirm it by clicking to "Yes" button.
    Running the Command Line as an administrator
    Step 1:Running the Command Line as an administrator
  2. Paste the command below into the Command Line that opens up and hit the Enter key.
    sfc /scannow
    Scanning and fixing system errors with the sfc /scannow command
    Step 2:Scanning and fixing system errors with the sfc /scannow command
  3. This process can take some time. You can follow its progress from the screen. Wait for it to finish and after it is finished try to run the software that was giving the dll error again.

Method 5: Fixing the Autocountercontrol.dll Errors by Manually Updating Windows

Most of the time, softwares have been programmed to use the most recent dll files. If your operating system is not updated, these files cannot be provided and dll errors appear. So, we will try to solve the dll errors by updating the operating system.

Since the methods to update Windows versions are different from each other, we found it appropriate to prepare a separate article for each Windows version. You can get our update article that relates to your operating system version by using the links below.

Guides to Manually Update for All Windows Versions

  1. Guide to Manually Update Windows 10
  2. Guide to Manually Update Windows 8.1 and Windows 8
  3. Guide to Manually Update Windows 7 and Windows Vista
  4. Guide to Manually Update Windows XP

The Most Seen Autocountercontrol.dll Errors

It's possible that during the softwares' installation or while using them, the Autocountercontrol.dll file was damaged or deleted. You can generally see error messages listed below or similar ones in situations like this.

These errors we see are not unsolvable. If you've also received an error message like this, first you must download the Autocountercontrol.dll file by clicking the "Download" button in this page's top section. After downloading the file, you should install the file and complete the solution methods explained a little bit above on this page and mount it in Windows. If you do not have a hardware problem, one of the methods explained in this article will solve your problem.

  1. "Autocountercontrol.dll not found." error
  2. "The file Autocountercontrol.dll is missing." error
  3. "Autocountercontrol.dll access violation." error
  4. "Cannot register Autocountercontrol.dll." error
  5. "Cannot find Autocountercontrol.dll." error
  6. "This application failed to start because Autocountercontrol.dll was not found. Re-installing the application may fix this problem." error